H1 2026 Top 10 Laboratory Grinding Mills: Comparing Chinese and International Brands
Instrument.com.cn News — Looking back at the first half of 2026, driven by sustained demand from materials science, biopharmaceuticals, food & agriculture, and environmental testing, the grinding mill category has shown a clear trend of technology refinement and application scenario diversification.
Based on comprehensive traffic data including site-wide user visits, searches and inquiries, Instrument.com.cn conducted an in-depth statistical analysis of the category and compiled the “H1 2026 Grinding Mill Popularity Ranking Top 10.” The list covers well-known domestic and international brands such as FRITSCH (Germany), Ant Source, Shanghai Jingxin, Verder (Retsch), Shanghai Yiwei, Jeio Tech (Korea), IKA, and GrinderMan (click a product name in the table to view its detail page), and reflects the market’s and users’ areas of focus.
Overall, the listed products cover multiple technical dimensions — from nano-scale planetary ball milling and high-speed knife-type grinding to cryogenic freeze milling and three-roll precision dispersion — meeting the high-energy pulverization needs of hard and brittle samples while also accommodating the special processing requirements of soft, fibrous and heat-sensitive materials. At the same time, user attention to core parameters such as the final output particle size (with general demand for micron- or even sub-micron level), batch-processing flexibility, and grinding media compatibility continues to rise, reflecting the downstream application end’s higher expectations for homogenization, standardization and high throughput in sample preparation. Below are the detailed ranking and an analysis of the core parameters of the most popular products:
The Ranking
| Rank | Product Name & Model | Instrument Brand |
|---|---|---|
| 1 | FRITSCH (Germany) Nano-Scale High-Energy Planetary Ball Mill P-7 premium | Beijing FRITSCH Scientific Instruments Co., Ltd. |
| 2 | Ant Source Knife-Type Grinding Mill AM600S / Food, Agriculture | Ant Source Scientific Instruments (Beijing) Co., Ltd. |
| 3 | Cryogenic Grinding Mill JXFSTPRP-CLN | Shanghai Jingxin Industrial Development Co., Ltd. |
| 4 | Retsch (Germany) Cryogenic Mixer Mill MM400 | Verder (Shanghai) Instruments & Equipment Co., Ltd. |
| 5 | Shanghai Jingxin Fully Automatic Sample Rapid Grinding Mill | Shanghai Jingxin Industrial Development Co., Ltd. |
| 6 | Retsch (Germany) Knife-Type Grinding Mill GM200 | Verder (Shanghai) Instruments & Equipment Co., Ltd. |
| 7 | Yiwei Technology Multi-Function High-Energy Ball Mill IM600 | Shanghai Yiwei Technology Co., Ltd. |
| 8 | KM Tech Imported Three-Roll Grinding Mill KRM-50B | Jeio Tech Co., Ltd. — Shanghai Representative Office |
| 9 | IKA (Germany) A 11 Basic Analytical Mill | IKA (Guangzhou) Instruments & Equipment Co., Ltd. (IKA China) |
| 10 | GrinderMan Vibratory Ball Mill GT300 | Beijing GrinderMan Instruments & Equipment Co., Ltd. |
- Scope: the scanning electron microscope category on the Instrument.com.cn platform
- Period: January 1, 2026 – June 30, 2026
- Basis: a composite popularity index derived from website user behavior data (search volume, page views, etc.)
Analysis of the Most Popular Products
TOP 1 FRITSCH (Germany) Nano-Scale High-Energy Planetary Ball Mill P-7 premium
Core parameters:
- Maximum feed size: < 5 mm
- Maximum sample volume: 70 mL
- Final fineness: < 0.1 µm
- Maximum main-disk speed: 1100 rpm
- Maximum number of samples that can be processed simultaneously: 2
- Grinding method: dry / wet
TOP 2 Ant Source Knife-Type Grinding Mill AM600S
Core parameters:
- Sample type: dry, elastic, fibrous, soft, medium-hard, water-containing, oil-containing, fat-containing
- Feed size: 10–50 mm
- Output size: approximately 300 µm
- Sample volume: 700 mL (Max)
- Speed: 1000–15000 rpm (customizable)
- Blade diameter and peripheral speed: 118 mm / approximately 12.4–62 m/s
- Application range: dry grinding, wet grinding, cryogenic grinding
TOP 3 Cryogenic Grinding Mill JXFSTPRP-CLN
Core parameters:
- Instrument type: grinding mill
- Sample suitability: hard samples
- Output particle size: below 0.01 mm
- Feed particle size: no requirement, adjusted according to the adapter
- Discharge particle size: ~5 µm
- Grinding media: stainless steel, chrome steel, zirconia, tungsten carbide, quartz sand
TOP 4 Retsch (Germany) Cryogenic Mixer Mill MM400
Core parameters:
- Maximum feed size: ≤ 8 mm
- Final discharge particle size*: ~ 5 µm
- Batch feed quantity*: max. 2 × 20 mL
- Number of grinding stations (number of grinding jars accepted): 2
- Vibrational frequency: 3 – 30 Hz (180 – 1800 min−1)
- Typical grinding time: 30 s – 2 min
- Max. grinding time: 99 h
- Application range: dry grinding, wet grinding, cryogenic grinding
TOP 5 Shanghai Jingxin Fully Automatic Sample Rapid Grinding Mill
Core parameters:
- Sample suitability: cryogenic samples
- Output particle size: below 0.01 mm
- Feed particle size: no requirement for feed, depends on the adapter size
- Discharge particle size: ~5 µm
- Batch grinding volume: 24 × (0.2–0.5 mL) / 24 × 2 mL / 8 × (5–15) mL / 4 × 25 mL / 2 × 50 mL
- Grinding media: stainless steel, chrome steel, zirconia, tungsten carbide, quartz sand (grinding ball materials)
TOP 6 Retsch (Germany) Knife-Type Grinding Mill GM200
Core parameters:
- Sample suitability: soft samples
- Output particle size: below 0.01 mm
- Feed particle size: 10–40 mm
- Discharge particle size: < 300 µm
- Batch grinding volume: 700 mL
TOP 7 Yiwei Technology Multi-Function High-Energy Ball Mill IM600
Core parameters:
- Sample suitability: hard samples
- Output particle size: below 0.01 mm
- Feed particle size: < 10 mm
- Discharge particle size: ~5 µm
- Batch grinding volume: 2 × 30 mL when using grinding jars; 8 × 50 mL when using centrifuge tubes
- Grinding media: grinding media
TOP 8 KM Tech Imported Three-Roll Grinding Mill KRM-50B
Core parameters:
- Sample suitability: soft samples
- Output particle size: below 0.01 mm
- Feed particle size: 500 µm
- Discharge particle size: 2 µm
- Batch grinding volume: 5 L / hour
- Grinding media: chrome steel / B4C / alumina / zirconia / SiC / TC
TOP 9 IKA (Germany) A 11 Basic Analytical Mill
Core parameters:
- Sample suitability: hard samples
- Output particle size: below 0.01 mm
- Feed particle size: 10 mm
- Discharge particle size: 1 – 100 µm
- Batch grinding volume: 80 mL (250 mL optional)
TOP 10 GrinderMan Vibratory Ball Mill GT300
Core parameters:
- Sample suitability: soft samples
- Output particle size: 0.01–0.5 mm
- Feed particle size: < 10 mm
- Discharge particle size: < 5 µm (depending on sample properties)
- Batch grinding volume: 20 mL
About Category Pioneers
To help industry users efficiently screen suitable equipment and connect precisely with quality manufacturers, Instrument.com.cn’s “Category Pioneers” program carefully selects brands in science instrument sub-categories that excel in product quality, technological leadership and service capability and rank in the domestic top 5 or imported top 5 of their segment — providing an important basis for instrument purchasing decisions.
Click the link below to learn more about the latest Category Pioneers news: https://www.instrument.com.cn/event/plxf2026
View More from This Booth
How to Select a Biological Microscope: Do Not Prioritize Magnification First
Inconsistent Results When Operators Change? This Chinese-Made Homogenizer Turns Hands-On Expertise into Standardized Programs
Mid-Infrared Spectroscopy Identifies Waste Plastics: FOLI10 for Rapid Plastic Identification and Chemometric Modeling
Haier Biomedical's Stackable Shaking Incubator: Precise Temperature Control for Quieter Culturing

