Selection of high-throughput tissue grinders for pharmaceutical company R&D laboratories: considerations of throughput and repeatability of high-throughput grinders
The biggest difference between biological sample processing in pharmaceutical company R&D departments and ordinary life science laboratories is "large quantities and strict requirements". A toxicology project may involve dozens of animals, and multiple different organs must be taken from each animal, and each organ must be sampled at different time points. It is common to process hundreds or even thousands of samples in one batch. This kind of large-volume level cannot be handled by manual grinding. JingxinHigh-throughput tissue grinderIt is the standard grinding equipment for the experimental R&D department.

Why do pharmaceutical companies’ research and development have such high requirements for sample pre-processing?
Data from pharmacokinetic and toxicological studies directly support IND filing and clinical decision-making. If something goes wrong in the sample pre-processing step, it will be useless no matter how accurate the blood drug concentration data measured by LC-MS/MS is later. Specifically, pharmaceutical companies have the following requirements for tissue grinding:
1. Sample grinding repeatability. For samples taken from the same organ of the same animal from different locations, the concentration of the homogenate must be consistent. If the grinding is uneven, the measured drug concentration will be biased and data interpretation will be problematic.
2. Sample grinding throughput. A project often has hundreds of samples. If a single processing takes several minutes, the entire pre-processing cycle will take a long time. High-throughput equipment processes dozens or hundreds of samples at a time, which is the key to efficiency.
3. Prevent cross-contamination. Samples from pharmaceutical companies are precious, and if one sample is contaminated, the entire experiment may have to be redone. The solution of disposable centrifuge tubes and grinding beads fundamentally avoids cross-contamination between samples.
4. Low temperature control. Many drugs are unstable in tissues. If heat is generated during the grinding process and the drugs are degraded, the measured concentration will be low. Grinding equipment with cooling function is a hard requirement.
Typical processing procedures for toxicological samples
Taking the rat toxicology experiment as an example, the routine process is: remove the organs after the animal is sacrificed → weigh → add lysis solution or saline → add grinding beads → place in a high-throughput tissue grinder → grind into homogenate → centrifuge and take the supernatant → perform LC-MS/MS analysis.
In this process, the key parameters of the sample grinding step are: grinding time, frequency, bead size, sample and liquid ratio. After the parameters are determined, all samples in the same batch must be run with the same parameters to ensure consistent homogenate concentration.
The advantage of the high-throughput tissue grinder is that it can place a 96-well plate or multiple centrifuge tube racks at a time, and grind hundreds of samples at the same time. The grinding equipment uses high-speed vertical vibration to drive the grinding beads in the tube to impact the tissue sample, and homogenize the hard tissue (such as bone, tumor mass).
The balance between throughput and repeatability of high-throughput tissue grinders
Many people think that high-throughput grinding equipment is just "loading a few more at a time." However, in the actual scenario of pharmaceutical companies, the real difficulty is not the throughput itself, but whether the repeatability of sample grinding can be maintained after the throughput increases. If 96 samples are run at one time, if the equipment vibrates unevenly and the samples in the middle of the plate and the edges of the plate are ground to different degrees, the measured data will have systematic deviations. This kind of deviation will become a "plate effect" in statistical analysis, which is very troublesome to explain.
Therefore, when pharmaceutical companies choose a high-throughput tissue grinder, they will focus on: the uniformity of grinding of samples from different locations in the same batch, and whether the repeatability parameters between different batches are stable. Shanghai Jingxin JXFSTPRP-576Plus high-throughput tissue grinder adopts the principle of high-speed vertical vibration, combined with disposable centrifuge tubes and grinding beads, to maintain better uniformity during simultaneous multi-station processing. From 24-bit to higher-throughput models, we cover the experimental needs of projects of different sizes.
Special considerations for pharmacokinetic samples
Pharmaceutical samples (plasma, tissue homogenate) are sensitive to drug stability. If the temperature rises during sample grinding, some drugs (such as protein drugs, unstable small molecules) will degrade. At this time, it is necessary to pre-cool the sample tube and grinding module in advance; turn on cooling during the sample grinding process or operate in a low-temperature environment; control the single grinding time to avoid continuous heat generation.
Pharmacokinetic experiments usually require standard curves and quality control samples. The grinding preparation of these samples must also follow the same grinding process as the unknown samples. If the grinding conditions of the standards are different from those of the unknown samples, there will be systematic errors in the quantitative results.
Several key points in the practical operation of high-throughput tissue grinder
1. Sample number management. When hundreds of samples are processed at the same time, confusion in numbering is a big no-no. It is recommended to use a QR code or barcode system and scan it at each step of processing to ensure sample traceability.
2. Grinding bead selection. Use larger beads for hard tissues (bones, tumors) and smaller beads for soft tissues (liver, spleen). If you choose the wrong beads, the grinding efficiency will be low and may not be broken.
3. Lysis solution ratio. The ratio of tissue weight to lysis buffer should be fixed. If the ratio is wrong, the homogenate concentration is too high or too low, and subsequent machine testing may exceed the linear range.
4. Cleaning of grinder equipment. Although disposable centrifuge tubes are used, the modules and fixtures of the equipment themselves must be cleaned regularly to avoid residual contamination.
The value of high-throughput tissue grinders in the research and development of pharmaceutical companies is not only "fast", but also "fast and stable at the same time." Toxicological and pharmacokinetic data support drug development decisions, and there is no room for error in the sample preprocessing step. Sample processing throughput solves the problem of grinding efficiency, repeatability solves the problem of data quality, and prevents contamination and protects precious samples - only when these three things are done well can the sample processing link of the pharmaceutical company's R&D laboratory be considered qualified. For pharmaceutical companies, choosing a tissue grinder with high throughput, stable parameters, and anti-cross-contamination is a cost-effective investment in the construction of R&D infrastructure.
View More from This Booth
How to look at the selection parameters of air flow screener? Practical Guide to Screen Selection and Air Pressure Adjustment
Biopharmaceutical R&D | Application points of GSL high-pressure homogenizer in cell disruption
Laboratory grinders for processing chemical raw materials: How particle size uniformity affects subsequent reaction repeatability

