Corrosion-resistant diaphragm vacuum pump: providing clean, oil-free negative pressure solutions for corrosive experimental conditions
Shanghai Zhetu Scientific Instrument Co., Ltd. was officially launchedVGMCorrosion-resistant diaphragm vacuum pump. This series of products usesPTFE、FFKMThe oil-free vacuum chamber is made of perfluorinated and corrosion-resistant materials, with no oil lubrication and no media pollution throughout the process. It can withstand volatile gases from highly corrosive media such as concentrated hydrochloric acid, nitric acid, various ketones, esters, and halogenated organic solvents. It is widely suitable for laboratory analysis, chemical synthesis, sample pretreatment, solid phase extraction, rotary evaporation, vacuum filtration, vacuum drying, and waste liquid negative pressure suction. It can be directly used with gas chromatography, mass spectrometers, chemical small negative pressure reaction devices, and environmentally friendly exhaust gas sampling equipment.
The entire road is corrosion-resistant, making complexity simple
VGMThe core competitiveness of the series lies in"Corrosion-resistant all the way"Design: All core components in contact with gas are made of high-end corrosion-resistant materials——The diaphragm isPTFE+FKMComposite layer, valve plate selectionFFKMPerfluororubber, air chamber, pipeline and air extraction joint integratedPTFECladding, metal parts are not in direct contact with corrosive gases. Users do not need to install additional anti-corrosion pre-filtration devices, and can continuously pump acid, alkali and organic vapor for a long time without problems such as cavity rust, seal swelling and breakage. It simplifies supporting pipelines and significantly reduces consumable replacement costs.
Two speeds optional, with gas ballast support
In response to the differentiated needs of different experiments for negative pressure levels, a series of33L/minand60L/minTwo pumping speed models:33LThe ultimate vacuum can reach6mbar(600Pa),60LThe high vacuum model can reach the ultimate vacuum2mbar(200Pa). Equipped with all series200WHigh-power motor and high-torque power output can quickly establish negative pressure upon startup, effectively shortening the waiting time for rotary evaporation, drying and batch filtration. The equipment is equipped with a gas ballast valve as standard. When pumping mixed gases containing water vapor or trace amounts of solvent vapor, the gas ballast can be turned on to prevent the medium from condensing and adhering to the diaphragm, stably maintaining the vacuum degree; the standard pumping diameter supports single path/Dual-channel synchronous air extraction further improves experimental processing efficiency.
Low temperature rise, low vibration, support24Hours of continuous operation
Aiming at the pain points of long-term laboratory operation,VGMThe series optimizes the air duct structure of the whole machine and is equipped with enlarged cooling fan blades. Under full load conditions, the rotation speed is stable without dropping. After long-term full load operation, the surface temperature of the pump body is not higher than50℃. The low temperature rise not only ensures that the power continues without attenuation, but also effectively slows down the aging of seals and extends the service life of diaphragms and valve plates. The internal crankshaft transmission component has completed high-precision dynamic balance correction before leaving the factory. The amplitude of the whole machine is extremely small. There is no displacement or resonance noise when placed on the experimental bench, and it will not interfere with surrounding precision instruments such as chromatography and mass spectrometry that are sensitive to vibration.
Clean and oil-free, say goodbye to oil pump troubles
Compared with traditional rotary vane oil pumps,Corrosion-resistant diaphragm vacuum pumpVGMThe series relies on the diaphragm oil-free vacuum principle. There is no need for lubricating oil inside the cavity. Oil mist and oil-free vapor reflux are not produced during the entire suction process, eliminating the risk of samples and pipelines being contaminated by oil. The clean vacuum output can be directly connected to precision analysis instruments to ensure accurate and reliable detection data. At the same time, the maintenance work of regular replacement of vacuum oil is eliminated, and there are no environmental problems such as waste oil deterioration and hazardous waste disposal, which effectively reduces the pressure of environmental protection treatment in the laboratory.
Lightweight and portable, easy to maintain
VGMThe series adopts an integrated appearance optimization design, with a smaller body size and lighter weight at the same flow rate. The overall dimensions are only270×250×210mm(33Lmodel)/320×270×210mm(60Lmodel), significantly reducing laboratory benchtop occupation. The whole machine has a modular integrated structure, and the shell is easy to disassemble and assemble. Later replacement of diaphragms, valve plates and other consumables does not require complicated disassembly. A single person can quickly complete maintenance, fully adapting to the operation space of a small laboratory.
In addition, the series also launchedVGM-F3306EXExplosion-proof model, using variable frequency speed regulation to provide more options for chemical industry and environmental protection scenarios with special safety requirements. All product power supplies are220V/50Hz,Enter/Inner diameter of air outlet port8/8mm, plug and play, convenient for users to deploy quickly.
In the future, Shanghai Zhetu Scientific Instrument Co., Ltd. will continue to delve into the field of laboratory vacuum equipment to"Abandon impetuosity and concentrate on hard work"attitude, providing more reliable and cleaner negative pressure solutions for scientific research and industrial users.