Frees desktop ultra-thin probe atomic force microscope AFM-Piccolo
Core Specifications
Product Details

AFM-Piccolo is a desktop atomic force microscope specially developed by Forex Instruments for scientific research users. It is equipped with an ultra-thin optical lever probe. The space above and front of the probe is completely open. It is especially suitable for in-situ integration with various high-resolution optical microscopy systems.
Ultra-thin probe

Patented flat light lever optical path, effective thickness of the probe <8 mm
The space above and in front of the probe is unobstructed, suitable for upright and tilted objectives
The sample scanning instrument architecture ensures that the relative position of the probe and objective lens remains unchanged
Multiple sets of precision screw adjustment mechanisms facilitate laser alignment and needle drop position adjustment
In-situ use with white light profilometer

AFM-Piccolo can be used in situ with a white light profilometer. In the meandering grid test, the combined system uses a white light interference probe and an atomic force probe to perform in-situ cross-scale characterization of the grid standard sample, respectively obtaining a wide range of three-dimensional topography and local contours and roughness, and enabling comparison of the height measurement results of the same position by the two measurement methods.
Used in situ with Raman microscopy

AFM-Piccolo can be used in situ with a Raman microscope. The AFM and Raman microscope in the combined system were used to conduct in-situ morphology imaging and spectral detection of silver nanowires on the surface of a gold film dispersed with methyl violet molecules. It verified the surface-enhanced Raman spectroscopy effect under this system and the correlation between the Raman signal intensity and the direction of the nanowires.
Please note: AFM-Piccolo product prices will vary due to different parameter configurations.
- scannerFlexible hinged 3D orthogonal scannerXY scan range≥100 μm×100 μmZ scan range≥5 μm, optional 10 μm/15 μm/20 μmnoise levelZ direction noise level ≤0.04 nm RMS value
- sample stageManual sample stageSample diameter≤30 mmSample thickness≤5 mm
- ProbeUltra-thin probeEffective thickness<8 mmopening width10 mmDetector noise floorAbout 40 fm/Hz½
- Optical systemInstallation methodUpright/Tiltobjective lens10X, optional 20X/50X lens, up to 100X lens (WD≥8 mm)camera6.3 million pixels, color CMOS
- controllerprocessor2×FPGA+1×DSPAnalog-to-digital converter (ADC)4×High Speed ADC (40MS/s, 16bit)
6×Middle Speed ADC (1MS/s, 20bit)
4×Low Speed ADC (100kS/s , 24bit)Digital to Analog Converter (DAC)4×High Speed DAC (50MS/s, 16bit)
6×Middle Speed DAC (1MS/s, 20bit) - AFM modeAFM mode
Topography imaging
Contact Mode
Tapping Mode
Magnetism mode
Magnetic force microscopy (MFM)
electrical mode
Electrostatic force microscopy (EFM)
Kelvin Probe Force Microscopy (KPFM)
Piezo force microscopy (PFM)
Conductive Atomic Force Microscope (C-AFM, optional)
mechanical mode
Lateral force microscopy (LFM)
Mechanical Mapping
blend mode
True 3D measurement mode (True3DMeasurement™)
Nano Lithography
Nano Manipulation
Core Controller (S-Controller)
Independently developed new generation domestic multifunctional atomic force microscope controller, using FPGA+DSP architecture
Equipped with 24 independent high-precision ADC/DAC, it can realize high-speed parallel processing and synchronous control of various signals
It can provide hardware support for various AFM working modes, and its comprehensive performance reaches the world-class level.
Offline analysis software
The offline analysis software FreeAnalysis equipped with AFM-Piccolo can provide standard functions such as leveling, filtering, 2D/3D display, cross-section analysis, roughness calculation, cropping, splicing, Fourier transform, etc., and supports the customization of exclusive analysis functions for specific samples.
Real-time control software
AFM-Piccolo is equipped with real-time control software FreeControl, allowing users to flexibly configure various scanning control parameters.