InstrumentCube
Products

Home/News/Behind the rush of "third-generation Kirin battery": the "key line of defense" that delicately protects battery safety
Company News

Behind the rush of "third-generation Kirin battery": the "key line of defense" that delicately protects battery safety

Instrument.com.cn Apr 27, 2026

Behind the rush of “Third Generation Kirin Battery”:subtle"Guarding battery safety"keyline of defense"

recently, the new energy circle was detonated by CATL’s “third-generation Kirin battery”. The third generation Kirin battery is based on280Wh/kgThe energy density not only makes the battery life breakthrough1000 kilometersmark, making 10C supercharging a reality——6 minutes flash charge, the energy replenishment efficiency is close to that of fuel vehicles. However, in this carnival about "mileage anxiety" and "energy replenishment speed", a deeper torture followed:When the battery pours in a massive amount of electric energy within 6 minutes, and when the energy density approaches the physical limit,Battery safetyhowcontrol?

From "endurance race" to "microscopic war"

Third generation QiThe core reason why Lin Battery dares to provide a "full charge in 6 minutes" under the extreme overcharge equivalent to 10C peak value of 15C lies in its comprehensive innovation of lithium iron phosphate cathode, modified graphite/low expansion silicon carbon anode, high heat-resistant coating separator and low-impedance electrolyte system.butHigh-rate and high-current charging will aggravate theRisk of thermal runaway,Lithium evolution from negative electrodeand material structure damage and other safety hazards. In this "microscopic war" that is invisible to the naked eye,Beijing Jingwei Gaobo Instrument Co., Ltd.(hereinafter referred to as“subtle”) as material characterizationDiversified solutionsofprovider, is using extremely precise detection technology to provide batterysafetyBuild the first line of defense.

Providing precise rulers for "extreme manufacturing"

Faced with the extreme indicators of "1,000 kilometers of battery life" and "6-minute flash charging" proposed by CATL, the research and development and quality control of battery materials must shift from "empiricism" to "dataism."

subtleMaterial characterizationsolution,focusCore pain points of battery materials:

1. answerLithium precipitation on the negative electrode:Specific surface area and pore size analysisTest material properties

Overcharging requires lithium ions to shuttle between the positive and negative electrodes at a high rate,likeLithium ions have no time to embed in the negative electrode,will lead toLithium dendrites precipitated on the surface,causeInternal short circuitandcapacity fade. The specific surface area and pore size distribution of anode materials (such as new generation silicon carbon) directly affect the insertion/extraction channels of lithium ions. Aiming at lithium precipitation in the negative electroderisk, subtlecanProvide the followingMaterial Characterization Solutions:

• DX 400 Dynamic chromatography specific surface area measuring instrument , specially designed for electrode materials with small specific surface area, can accurately test as low as0.1 m²/gThe ultra-small specific surface area sample ensures the dynamic performance of the negative electrode under high energy density.。

• Matrix 1000 Specific surface area and Pore ​​size analyzer , using the static capacity method to fully characterize the pore size distribution of the cathode material and separator to ensure that the battery achieves280Wh/kgenergy density while still having a stable and efficient ion transport network。

2. Targeting the risk of thermal runaway:Thermal analysis technologyControl battery safety

The thermal effects brought about by high energy density and ultra-fast charging make the thermal stability of battery materials a safety lifeline. subtleBuilt a completeThermal analysis product matrix provides safety assessment of battery materialsimportantmeans:

• Differential Scanning Calorimeter : It can accurately measure the thermal safety of positive/negative electrode materials under different SOC (state of charge), analyze the thermal stability and decomposition temperature of the electrolyte, and measure the melting point and closed hole temperature of the separator.. This is crucial for predicting the thermal behavior of batteries under extreme operating conditions.

• Thermogravimetric Analyzer : It can be used to evaluate the thermal stability and component content of positive/negative electrode materials, the thermal stability of binders, and can analyze the gas release during the thermal decomposition of materials through EGA coupling technology (combined with mass spectrometry, infrared, and gas chromatography).

• Synchronous Thermal Analyzer :Thermogravimetric and thermal signals can be obtained simultaneously, which can be used to study the thermal stability and structural evolution of positive/negative electrode materials under different SOCs. It can also analyze the sintering process and components of the precursor, as well as the thermal decomposition characteristics of separators and binders.

• Thermal Mechanical Analyzer :It can accurately measure the closed cell temperature and shrinkage of the separator, as well as the coefficient of thermal expansion (CTE) of copper foil and aluminum foil.

3. Prevent material failure:XRDDetermine the crystal structure

During the charge and discharge process, repeated high stress will cause the electrode particles to crack and the current collector to peel off, eventually leading to an increase in internal resistance and shortened life.The evolution of the crystal structure of positive and negative electrode materials can provide early warning of the risk of battery material failure,Subtle varietyX-ray diffractometer It can be used for crystal structure analysis of powder materials, research on graphite crystallization degree, calculation of cation mixing of ternary materials, and can realize in-situ battery testing and real-time tracking of structural evolution during charging and discharging.

High-level products are inseparable from precise measurement

CATL has set a new height in global energy power with its "third-generation Kirin battery", and behind this milestone,Material characterization capabilitiesRepresenting China's high-end instruments and metersimportant force. From domestic mainstream new energy battery companies to leading power battery manufacturers, sophisticated equipment has become a key testing tool in new energy R&D and production lines. On the way to the ultimate performance of power batteries, Jingwei will continue to protect every safe trip with precise data.



Beijing JWGB Instruments Co., Ltd.
Beijing JWGB Instruments Co., Ltd.
BasicBusiness License
Main products: X-Ray Diffractometer (XRD), Pore Size/Porosity Analyzer, Surface Area and Pore Size Analyzer, Chemisorption Analyzer, Density Meter