Application Case | DSC applied to study the thermal properties of polymer plastics
Preface
The thermal properties of polymer plastics directly determine their processing window, use temperature and product performance, and the characteristic temperature (melting temperatureTm , crystallization temperatureTc , glass transition temperatureTg ) and heat enthalpy (melting enthalpyΔHm, crystallization enthalpyΔHc) is the core index characterizing its phase transition behavior and aggregation structure. The former can be used for material identification, process parameter setting and thermal history tracing, while the latter can calculate crystallinity, evaluate nucleating agent efficiency and monitor the degree of aging degradation. It has important engineering value in material research and development and production quality control.
In this case, Yangyi Technology DSC-40B differential scanning calorimeter was used to carry out measurement experiments on the characteristic temperature and thermal enthalpy of polymer plastics. Through heat flow difference analysis under programmed temperature control, the heat-related data of the sample was quickly and accurately obtained, and its practical application in material characterization and process optimization was discussed based on typical samples.

Figure 1 DSC-40B Differential Scanning Calorimeter
Application cases
1. Sample information
The sample is in the form of black granules. Cut an appropriate amount of the sample and put it into a solid aluminum crucible and cover it for testing. The sample is as shown in the picture.

Figure 2 Actual shot of sample
2. Experimental conditions
Testing instrument: DSC-40B differential scanning calorimeter;
Test environment temperature/humidity: 23.3℃, 63.5% RH;
Temperature control mode:
① Scanning mode: 40-350℃, 10℃/min;
② Scanning mode: 350-40℃, -10℃/min;
③ Scanning mode: 40-350℃, 10℃/min;
Crucible: standard aluminum crucible;
Atmosphere: 50 mL/min nitrogen;
Test method: according to customer requirements;
3. Testing process
Turn on the DSC-40B differential scanning calorimeter;
Step1: Take an empty crucible with a similar mass and place the sample in one of the crucibles;
Step2: Open the furnace cover and place the crucible containing the sample and the reference crucible on the test platform;
Step3: Close the furnace lid, open the atmosphere, set the temperature control program, and start the experiment;
4. Experimental results

Figure 3 Sample first timeTemperature rising DSC heat flow curve

Figure 4 Sample second timeTemperature rising DSC heat flow curve
Table 1 Summary of sample DSC test data

Summarize
This experiment fully verified the professional strength of Yangyi Technology DSC-40B differential scanning calorimeter in characterizing the thermal properties of polymer materials. The instrument relies on a highly sensitive heat flow sensor to accurately capture the multiple phase transition behaviors of complex polymer systems, providing reliable data support for the measurement of characteristic temperature and heat enthalpy.
View More from This Booth
Top Papers from University of Science and Technology of China | How violently will the thermal runaway gas of lithium batteries "explode"? This study found the answer
Interpretation of standards | Differentiated requirements for power and energy storage batteries from the perspective of thermal safety testing
Hard core upgrade | Low temperature + fully automatic double buff, Yangyi Technology Differential Scanning Calorimeter DSC unlocks multi-scenario material thermal analysis

