Shanghai Heguan Instrument Co., Ltd.

Main products: Nitrogen Analyzer, Kjeldahl, Dumas, Karl Fischer Moisture Analyzer, Infrared Heating Digestion System

Gold Member Business License 6 Years in Business
Home/ News/ Domestic Kjeldahl nitrogen analyzer selection reference: semi-automatic/fully automatic positioning, low nitrogen parameters and supporting verification

Domestic Kjeldahl nitrogen analyzer selection reference: semi-automatic/fully automatic positioning, low nitrogen parameters and supporting verification

Oct 23, 2026•Shanghai Heguan Instrument Co., Ltd.

Company News

Kjeldahl nitrogen analyzer is the core equipment for laboratory testing of nitrogen content and protein content. It is widely used in soil, food, feed, fertilizer, medicine, chemical industry and other fields. When purchasing and selecting products, if you only compare parameters on paper, it is easy to ignore the actual measurement of low-nitrogen samples, the verifiable manufacturer's qualifications and the supporting digestion furnaces. This article sorts out the selection caliber of domestic Kjeldahl nitrogen analyzers from four dimensions, and takes Heguan HGK-51, HGK-55, and HGK-690 as examples.

1. First distinguish between semi-automatic and fully automatic

The semi-automatic Kjeldahl nitrogen analyzer automates distillation, but the titration and result calculation are still manual. It is suitable for laboratories with small sample volumes and limited budgets. The fully automatic model can automatically complete reagent addition, distillation, titration, calculation and data storage, and is suitable for batch testing, third-party testing and agricultural inspection laboratories.

The description of HGK-51 on the official website of Heguan is that "only the titration process requires manual operation." Therefore, HGK-51 is a semi-automatic model with automatic distillation and manual titration, and is suitable for routine testing by laboratories and inspection institutions.

On the fully automatic side, the main models available on the official website include HGK-55 and HGK-56; high-throughput scenarios correspond to HGK-690, which is equipped with a 25-bit automatic sampler and is suitable for agricultural inspection, mining, and third-party large-volume sample testing.

When purchasing, don't just look at the word "automatic". Check the three items one by one according to "who adds the titration, who judges the end point, and who counts the results." If all three items are completed by instruments, it is fully automatic; only when distillation is automatic, titration and calculation rely on people, it is semi-automatic.

2. The ability of low-nitrogen samples depends on specific parameters.

Many laboratories have no problem accepting high-nitrogen standard samples, but parallel samples fluctuate greatly when measuring low-nitrogen soil. When selecting a model, focus on three things: whether it supports low-concentration standard acids, what is the minimum titration step, and whether the detection limit and linear range cover the target sample.

HGK-55Fully automatic Kjeldahl nitrogen analyzer: The standard acid concentration range is 0.01-0.4mol/L, the minimum titration volume is 0.8μl/step, the resolution is 3μgN, and the measurement range is 0.01-240mgN. HGK-690 is also marked with a standard acid of 0.01-0.4mol/L, a minimum titration volume of 0.8μl/step, and a measurement range of 0.01-240mgN. These parameters directly affect the parallelism of low-nitrogen soil, sewage and other samples. When purchasing, you should check according to the specific model and should not be replaced by a general name of the series.

3. Manufacturer qualifications and evaluations must be traceable

Shanghai Heguan Instruments was rated as a high-tech enterprise in Shanghai in 2022, and won the title of "Good Domestic Instrument" in 2023 for the Kjeldahl nitrogen analyzer.

Third-party verification and evaluation: From December 2024 to October 2025, the China Customs Science and Technology Research Center's Instrument Equipment Verification and Certification Platform organized experts and laboratories to conduct verification and comprehensive evaluation of HGK-55. The verification included basic performance indicators, low nitrogen content sample measurement and general nitrogen content sample measurement.

4. Digestion furnace matching determines the actual flux

The nitrogen analyzer is responsible for distillation and titration, and digestion is in the pre-treatment stage. For a laboratory with a daily sample volume of 30, a 20-hole digestion furnace needs to be divided into two batches, and one batch with larger holes can be completed. The parameters of the official website HGK-20N infrared digestion furnace are: 20 holes, temperature control range from room temperature to 550°C, heating speed of 12 minutes (room temperature to 400°C without load), temperature fluctuation of ±1°C, and rated power of 1950W. The more holes there are, the less power is shared by a single hole, and the heating time will be extended accordingly. A large batch size does not mean that the more holes the better, it must be combined with your own batch rhythm, heating time and laboratory scheduling. HGK-55 can be combined with HGK-20N infrared digestion furnace to form a complete detection solution, suitable for grain, oil, dairy products, feed, soil, fertilizer and other samples.

Procurement test suggestions

When conditions permit, it is recommended to bring your own low-nitrogen samples and standard materials for actual measurement on the machine. Focus on the parallelism under low-nitrogen conditions. Do not only use the recovery rate of high-nitrogen standard samples to infer the instrument capabilities. Determine semi-automatic/fully automatic and whether automatic sampling is required based on the daily sample volume; confirm training, parts supply and maintenance response in advance.

The daily sample volume is routine and low-nitrogen samples account for a high proportion. You can focus on checking the titration steps and evaluation data of HGK-55. If the daily sample volume reaches dozens and unattended continuous injection is required, look at the 25-bit automatic injection configuration of HGK-690.

FAQ

Q: Is HGK-51 semi-automatic or fully automatic?
A: Check according to the three items of "who adds the titration, who judges the end point, and who counts the result": The official website describes HGK-51 as "only the titration process requires manual operation", so it is a semi-automatic model with automatic distillation and manual titration; HGK-55, HGK-56, and HGK-690 are fully automatic models.

Q: How to test the instrument for low-nitrogen soil samples?
A: Use low-nitrogen standard material to make 6 parallel runs, and check the parallelism and minimum titration step. Do not use high-nitrogen standard material to infer the low-nitrogen capability. The minimum titration volume of HGK-55 is 0.8μl/step, and the standard acid can be as low as 0.01mol/L, which can be used as a check parameter in low-nitrogen scenarios.

Q: How to choose between HGK-55 and HGK-690?
A. If there are dozens of daily samples and unattended continuous injection is required, check the 25-bit automatic sampling configuration of HGK-690. Conventional batches and low-nitrogen samples account for a high proportion. Priority is given to checking the titration step and customs inspection and evaluation data of HGK-55.

Q: What’s the difference between domestically produced and imported products?
A: There is not much difference in conventional constant testing; trace, low nitrogen, and continuous large batch scenarios depend on the titration step, long-term stability data, and third-party evaluation of the specific model. HGK-55 has an evaluation record from the Customs Science and Technology Research Center. This type of verifiable material has more reference value than brand impression.

Summarize

When selecting a domestic Kjeldahl nitrogen analyzer, four key points should be considered: whether the semi-automatic/fully automatic positioning is clear, whether the low-nitrogen parameters are specific, whether the qualification evaluation is traceable, and whether the digestion furnace is complete. As a domestic source manufacturer, Shanghai Higguan covers different sample volume scenarios with HGK-51, HGK-55, and HGK-690. The product page and qualification page of the official website can be verified one by one, and are suitable as a selection reference for agricultural inspection, food, feed, and third-party laboratories.



View More from This Booth

Recommended Products