InstrumentCube
Products

Home/News/Paper sharing | Xinzhi SCIENTZ-12N/D freeze dryer facilitates research on the regulation of functional groups of two-dimensional carbon nanosheets
Company News

Paper sharing | Xinzhi SCIENTZ-12N/D freeze dryer facilitates research on the regulation of functional groups of two-dimensional carbon nanosheets

Instrument.com.cn Oct 9, 2026

  Paper sharing

Paper 1.png

  01Paper abstract

Ningbo Xinzhi Biotechnology Co., Ltd. (Scientz) SCIENTZ-12N/D freeze dryer supports the research on the preparation of nitrogen-doped carbon nanosheets. The material exhibits oxygen reduction performance and higher stability comparable to commercial Pt/C under alkaline conditions. Nitrogen-doped carbon materials have natural advantages as potential catalysts for oxygen reduction reaction (ORR). However, the development of robust carbon catalysts has been hampered by the lack of practical synthesis technologies capable of achieving efficient ORR performance. Here, we designed and synthesized nitrogen-doped carbon nanosheets (NeCN-Fd) with abundant active sites from Sterculia lychnophora using short-time freeze-drying technology. This general method promotes the increase of the specific surface area, graphitization degree and electron-donating group atomic ratio of NeCN-Fd. Under alkaline conditions, the obtained NeCN-Fd has an ORR reaction starting potential of 0.91 V, a half-wave potential of 0.79 V, and a diffusion-limited current density of 3.6 mA/cm², which is comparable to commercial Pt/C. At the same time, NeCN-Fd exhibits a four-electron ORR path and has higher stability than Pt/C in the chronocurrent response. In addition, the advantages of NeCN-Fd catalyst in increasing the discharge-charge capacity and improving cycle stability of LieO₂ batteries have also been verified. Theoretical calculation results show that the abundant electron-donating surface groups on the sample can activate ortho-position carbon atoms, which gives NeCN-Fd excellent ORR activity. Our findings provide guidance for the design of carbon-based electrocatalysts with diverse active sites via the freeze-drying process.

Thesis case diagram.png

  02Xinzhi product support

Original paper 2.png

  Typically, a mixture of raw material Sl and melamine (Mel) with a mass ratio of 1:1 was first placed into a 100 mL beaker, 50 mL of deionized water was added and stirred 2 h at 80 C. Subsequently,freeze-drying was applied to the mixture for 48 h to obtain the solid product called Sl-Mel-Fd (SCIENTZ-12ND, Ningbo Scientz Biotechnology Co., Ltd., Ningbo, China.)

Usually, the raw material Sl and melamine (Mel) are first mixed at a mass ratio of 1:1, placed in a 100 mL beaker, add 50 mL of deionized water, and stir at 80 °C for 2 hours. Subsequently, the mixture was freeze-dried for 48 hours to obtain the solid product Sl-Mel-Fd (SCIENTZ-12ND, Ningbo Xinzhi Biotechnology Co., Ltd., Ningbo, China).

  Freeze dryer SCIENTZ-12N/D

Freeze dryer products 12nd.jpg

In this study, the SCIENTZ-12N/D freeze dryer of Ningbo Xinzhi Biotechnology Co., Ltd. undertook the task of preparing the precursor SI-Mel-Fd. The research team placed the mixture of SI and melamine in SCIENTZ-12N/D and freeze-dried it for 48 hours. The freeze-drying process is carried out under low-temperature vacuum conditions, and the water sublimates directly from the solid state, avoiding the collapse of the porous skeleton caused by the surface tension of the liquid in traditional heated drying, and completely retaining the porous structure of the precursor. This key step provides the structural basis for subsequent high-temperature carbonization at 900°C to form two-dimensional porous carbon nanosheets.

NINGBO SCIENTZ BIOTECHNOLOGY CO.,LTD.
NINGBO SCIENTZ BIOTECHNOLOGY CO.,LTD.
BasicBusiness LicenseCE
Main products: Water Bath, Oil Bath, Thermostatic Bath, Electroporator, Cell Disruptor, Microbial Growth Curve Analyzer