Sifang Instruments laser Raman analyzer facilitates efficient analysis of CO2 electrocatalytic gas phase products
one,In the dual-carbon era, CO₂ electrocatalytic reduction technology welcomes development opportunities
In the context of the national “dual carbon” strategy, electrocatalytic reduction of carbon dioxide (CO2RR) With the help of electric field drive and electrocatalyst, the greenhouse gas CO can be2Converting it into high value-added chemicals and fuels such as CO, formic acid, ethylene, ethanol, etc., and being able to couple renewable electricity such as wind power and photovoltaics, is the core technology path to achieve a closed-loop carbon cycle and reduce dependence on fossil energy.

2. Precise gas phase detection unlocks the core value of CO₂ electrocatalysis research
CO2RR is a complex reaction system with multi-proton-electron coupling. As the catalyst type and operating conditions change, multi-electron transfer will occur, generating CO, H2、CH4、C2H4、C2H2and other gas phase products. The accurate detection of gas phase products is of irreplaceable importance to scientific research and subsequent industrialization:
(1) Real-time monitoring of the reaction process:Evaluate the comprehensive performance of the catalyst, optimize the electrolysis working conditions, and analyze the complete electrocatalytic reaction path;
(2) Instantaneous product online detection:Realize CO2Instantaneous collection of gas phase products of electrocatalytic reduction enables rapid determination of Faradaic efficiency;
(3) Reduce model calculation bias:Directly carry out quantitative and accurate measurements of gas phase products, reduce model errors caused by indirect calculations, and intuitively restore the true chemical transformation rules.
3. The pain points of traditional detection are prominent, restricting in-depth research on CO₂RR
Current CO2The mainstream detection method of RR gas phase products is potentiostatic electrolysis + offline gas chromatography testing. This solution has obvious shortcomings:
(1) It can only obtain the total current signal and cannot capture the step-by-step dynamic process of the reaction, which is not conducive to the exploration of reaction mechanisms;
(2) Most of them are single-point steady-state tests, and it is difficult to carry out in-situ detection under potential scanning and potential modulation conditions;
(3) Gas chromatography equipment has a long analysis cycle, requires frequent calibration, consumes carrier gas and other consumables, has high usage costs, and complicated operating procedures.
4. Better detection solution: Laser Raman analyzer opens a new paradigm of in-situ detection
Compared with traditional gas chromatography analyzers, laser Raman spectroscopic gas analyzers based on the principle of Raman optical scattering have fast response times, do not require carrier gas, chromatographic columns and other consumables, and have low on-site maintenance costs; the detection equipment of this solution is compatible with CO2The RR reaction cells are connected in series, and the changing rules of gas phase products can be obtained online in situ during potential changes or modulation processes, and are suitable for all types of CO2The RR reaction is an important analytical tool for studying electrochemical reaction mechanisms and quickly screening and evaluating electrocatalysts.

five,Practical cases | Helping Hubeia certain pointCollege SOEC High Temperature CO2Electrolysis project implemented
(1) Project overview
This university laboratory focuses on SOEC high-temperature solid oxide electrolysis of CO2Research on CO production, the experimental object is a laboratory-made button electrolytic battery, CO2The inlet flow rate is set to 40mL/min.
(2) Problems with the original plan
Using traditional gas chromatography for detection, under a single constant potential condition, the analysis period of a single group of gas phase products exceeds 30 minutes, which makes it impossible to capture the dynamic changes of the reaction and it is difficult to analyze the step-by-step reaction behavior.
(3) Effect of the plan after transformation
Connect Sifang Instruments laser Raman analyzer and electrocatalytic device for series testing:
The analysis cycle of the same test point is greatly compressed to achieve instantaneous detection of gas phase products;
Real-time output of gas component data and online measurement of Faradaic efficiency;
Provide high-precision and continuous experimental data support for reaction mechanism analysis and catalyst performance evaluation.

6. Summary of advantages of laser Raman analysis solution
In-situ online: seamlessly connected in series with the electrocatalytic reaction cell, continuously collecting data following dynamic changes in potential;
Fast response: high time resolution, capture transient reaction signals, and make up for the shortcomings of offline chromatographic dynamic detection;
Low operation and maintenance costs: No need for carrier gas, chromatographic columns and other consumables, and subsequent maintenance is simple;
Scientific research adaptation: Adapt to various electrocatalytic systems such as high-temperature SOEC, GDE, and MEA, and serve scientific research scenarios such as catalyst screening and mechanism exploration.
View More from This Booth
The "15th Five-Year Plan" for coalbed methane sets the tone: With the output target of 26 billion cubic meters, which monitoring links will face rigid demand?
Sifang Instruments | A new generation of natural gas calorific value analyzer solves the problem of industrial energy measurement of multiple gas sources
Coal Chemical Process Gas Monitoring Plan (3) - Purification Chapter

